How to clean the solid-liquid separator correctly?

1. Stop the pump, only let the main machine of the solid-liquid separator rotate, discharge the residual solids in the main machine, and then take out the parts belonging to the slag plate from the spindle box;

2. Remove the screw shaft, remove the screen, clean the screen with a steel brush, and then reassemble;

3. Be careful not to wet the control circuit of the solid-liquid separator during cleaning.

How to improve the working efficiency of solid-liquid separator?

1、 First, improve production and system.

The machinery shall be operated in strict accordance with the production system and operating instructions of the solid-liquid separator to ensure the orderly production standards.

2、 Use skilled operators

Ensure that the operators master the operating skills and understand the production system of the solid-liquid separator, so as to * * * maximize the use of the solid-liquid separator.

3、 Regular maintenance.

The solid-liquid separator will produce wear (including physical wear and chemical damage) during use, thus reducing the working efficiency of the solid-liquid separator. Therefore, the solid-liquid separator needs regular maintenance to keep it in good working condition at all times.

Precautions for operation of solid-liquid separator:

Pay attention to the influence of the working environment on the equipment, such as static electricity, high temperature, etc. The power supply, plug and socket conforming to the provisions of ******* shall be used. The operator's hands must be dry when plugged in to prevent electric shock. Before using the solid-liquid separator equipment, check whether the suction medium is suitable for such equipment. The machine shall not be used in outdoor places. Please cut off the power before cleaning or maintaining the vacuum cleaner.

It shall not be used to absorb flammable, explosive, harmful, corrosive, volatile, radioactive liquids and gases, nor shall it be used in flammable and explosive dust and gas places. The surface temperature of the inhaler shall be ≤ 60 ℃. Clean the casing or replace the parts. When changing the working state, the power must be cut off. Regularly check the power cord for damage.

When the power cord is damaged or the machine fails, it needs to be replaced or repaired by the purchase department or professional personnel. When not in use, store the machine in a dry and ventilated environment. During the operation of the machine, pay attention to the liquid level of the liquid level display hose, keep the dust collecting bucket at a safe liquid level, and keep the oil suction machine in a good state. Clean the inhaled debris in the dust collecting bucket regularly and timely to keep the oil suction machine shell clean. When using the solid-liquid separator, pay attention to safety to avoid damage to the machine and personnel.