Maintenance when using screw press:

1. Before the screw press is started, in order to reduce the pollution caused by the use of materials, we need to clean the place where the materials contact.

Of course, in the process of use, attention should also be paid to the places where the equipment is easy to loosen, and then tighten.

3. When the screw compressor is working, it is easy to cause the equipment to stop or damage, and pressure will be generated inside the equipment, but it cannot be overloaded during operation.

4. When the screw press is used, appropriate lubricating oil shall be added to the equipment bearing regularly. This can reduce the generation of friction.

The spiral blade of the screw press is also very important: when selecting the screw press, we should first select the appropriate model according to our own needs. When we determine the model, we check the quality of the equipment.

Of course, in addition to the appearance, the internal structure of the equipment is also very important. Like the spiral blade, this part is easy to wear due to long-term work, so it must be selected with good quality.

Attention should be paid to the maintenance of the bearing of the screw press: if attention is paid to the maintenance at ordinary times, the consumption of the equipment will be reduced during the use, and the bearing in the equipment will play a great role when the large screw press is used. Because if the position is damaged, not only noise will be generated, but also the equipment will be greatly damaged. Pay attention to the maintenance of the bearing of the large screw press at ordinary times, and replace it regularly during use, because the wear of the position is relatively large. Through the above description, I believe you should also have a certain understanding of the importance of the bearing of the screw press, so you must do a good job in maintenance.

Depending on the purpose of your press, it is very important to choose whether you need a screw press or a hydraulic press. For example, for screw presses, you need to buy single screw presses, double screw presses, etc; For example, for a hydraulic press, a stainless steel press, a fruit press, and the like can be selected.

Press according to different properties of required materials. Density, shape, temperature, viscosity, particle size, activity, particle size distribution, corrosion and other characteristics, and different material characteristics, the applicability of the single screw press is also different.